Detector Image Not Found
Average User Rating:

Arrayit Corporation - InnoScan
Contact:

Arrayit Corporation

524 East Weddell Drive

Sunnyvale, CA 94089

POC: Rene Schena, CEO

408-744-1331

www.arrayit.com

System Cost: $125,000
Analysis Cost: $100
Survey Source: Vendor Supplied Information
General Description
0.5 micron resolution microarray scanner, fluorescence based, designed for laboratory analysis
Technical Description
Next generation microarray scanning technology. World’s only sub 1 µm microarray substrate slide scanner on the market. Proprietary rotary scanning architecture permits the fastest scanning speeds. 3 minutes to scan an entire 25 x 76 mm substrate slide. Scan 24 substrate slides in 100 minutes with autoload feature. Rotary scanning architecture reduces vibrational noise and increases image quality. Much greater reliability and longevity than conventional raster scanners. High resolution acquisition system: scans spot sizes down to 5 µm diameter. Real-time image acquisition for all microarray types including but not limited to in-situ high density glass slide microarrays, spotted microarrays of all kinds, tissue and cell microarrays. Low background noise and high sensitivity system. Uniform scanning across the entire microarray surface regardless of substrate type (glass, membrane and plastic). Not sensitive to shocks, vibrations and slide deformation (portable). Delivered with Mapix® software: an easy to use data acquisition and image analysis software including automatic spot recognition and powerful image analysis. Software for various OS environments (Linux, Windows ). Ethernet interface allows easy data sharing (scanner can be shared over network by several users). Affordable price, low maintenance. Lightweight, robust structure makes it portable system. Small footprint for laboratory space saving.
Evaluation Criteria
THROUGHPUT:
  • Between 2 and 15 minutes for detection
  • Multiple samples, multiple tests/sample per run
  • Greater than 750 samples every 2 hours
  • The system or device is currently semi-automated
  • Device or system is intended for multiple detection assays
  • 0-1 solutions, buffer, eluents, and/or reagents
  • 1 component
  • Less than 5 minutes is required for set-up
  • 3-5 steps are required for detection
LOGISTICS:
  • Very brief (minutes-hours) training and minimal technical skills
  • Approximately the size of a carry-on luggage suitcase
  • Between 5 and 25 kg
  • System or device has 110V electrical requirement
OPERATIONS:
  • Can be used from 4°C to 41°C
  • Components must be stored at room temperature (27°C)
  • Performance is not influenced by relative humidity
  • Between 1 to 3 years shelf life
  • 5-10 years expected life
  • Results can be viewed in real-time
  • The system or device is currently fully autonomous
  • The system software is open and available for modification
  • The system hardware is open and available for modification
DETECTION:
  • Possible the system could receive 510K clearance, no current efforts at this time
  • Possible the system could receive FDA approval, no current efforts at this time
  • This system does not test liquids
  • Superior specificity. System has a false alarm rate approaching zero (~0%)
  • 1-100 CFU per mL
  • 1-100 PFU per mL
  • Less than 1 ng per mL
Tier Selection
BioImageChemImageRadImage
Field Use
Mobile
Diagnostic
Analytical
Tier Key:
Tier 1 Top Tier
Tier 2 Second Tier
Tier 3 Third Tier
Tier 4 Fourth Tier
Tier 5 Bottom Tier
Scoring Analysis
Bar Chart Image Not Found
Impact Chart
Impact Chart Image Not Found
FIELD USE
MOBILE USE
DIAGNOSTIC USE
ANALYTIC USE