Detector Image Not Found
Average User Rating:

FLIR Systems, Inc. - BioCapture 650
Contact:

FLIR Systems, Inc.

27700 SW Parkway Ave.

Wilsonville, OR 97070

System Cost: $10,088
Analysis Cost: $71
Survey Source: Vendor Supplied Information
General Description
The BioCapture 650 Air Sampler collects aerosolized biological particles in the 1-10 micron diameter range including bacteria, viral particles and toxins and concentrates them into a buffer solution, maximizing the viability of these airborne particles. The sampler uses a disposable collection cartridge that houses the fluidics and sample fluid. Single-button operation, LCD and LEDs allow for ease of use in MOPP-IV personal protection clothing. The unit has flexible sampling times. After collection, sample is automatically deposited in an easily removed sample vial for subsequent analysis by PCR, hand-held assays, and other methods.
Technical Description
The BioCapture collects airborne particles utilizing FLIR patented rotating impactor technology. A rotating impactor/impeller captures particles in a water-based collection fluid that circulates through the collection zone. Manifold geometries that allow the air to be exhausted separately from the particle laden liquid have been optimized for minimum evaporation and maximum flow rate. The motor and control systems have been optimized for high impeller revolution rate and low power consumption while maintaining excellent reliability.
Evaluation Criteria
THROUGHPUT:
  • 1 sample, <10 tests/sample per run
  • Less than 32 samples every 2 hours
  • The system or device is currently fully automated
  • Device or system is designed for a single use
  • 2 solutions, buffer, eluents, and/or reagents
  • 1 component
  • No set-up of the system is required
  • 3-5 steps are required for detection
LOGISTICS:
  • Very brief (minutes-hours) training and minimal technical skills
  • Approximately the size of a toaster
  • Between 1 and 5 kg
  • This system is not capable of transmitting data
  • 1-2 hours battery life
OPERATIONS:
  • Can be used from 4°C to 41°C
  • Components must be stored at room temperature (27°C)
  • Device or system has peak performance at normal relative humidity conditions
  • Between 1 to 3 years shelf life
  • Greater than 10 years expected life
  • The system could be adapted to a fully autonomous system with some effort
  • The system hardware is closed and not available for modification
DETECTION:
  • Possible the system could receive 510K clearance, no current efforts at this time
  • Possible the system could receive FDA approval, no current efforts at this time
  • Less than 10 µL
Tier Selection
BioImageChemImageRadImage
Field Use
Mobile
Diagnostic
Analytical
Tier Key:
Tier 1 Top Tier
Tier 2 Second Tier
Tier 3 Third Tier
Tier 4 Fourth Tier
Tier 5 Bottom Tier
Scoring Analysis
Bar Chart Image Not Found
Impact Chart
Impact Chart Image Not Found
FIELD USE
MOBILE USE
DIAGNOSTIC USE
ANALYTIC USE